ASRock X99 Extreme11 LSI SAS3 Integrated RAID Solution User Guide - Page 31
Appendix
View all ASRock X99 Extreme11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SAS3 Integrated RAID Solution User Guide Appendix A: | Hardware and Software Requirements Appendix A Using the SAS3 Integrated RAID Configuration Utility This appendix explains how to use the command-line-driven SAS3 Integrated RAID configuration utility (SAS3IRCU) to create Integrated RAID volumes on LSI SAS3 controllers in the manufacturing environment. SAS3IRCU is a command-line utility that you can use to configure the Integrated RAID functions of LSI SAS3 controllers. SAS3IRCU is a minimally interactive program that you can execute from a command-line prompt or a shell script. When you use a SAS3IRCU command, the program returns a status value to the operating system when it exits. OEMs can use SAS3IRCU to configure Integrated RAID devices on the LSI family of MPT2.0-based SAS3 controllers. You typically use this utility for system configuration on the manufacturing floor. NOTE: End users should not use the SAS3IRCU utility. Instead, they should use the LSI SAS3 BIOS Configuration Utility (SAS3 BIOS CU) to create and manage Integrated RAID volumes. For more information, see Chapter 3 and Chapter 5. A.1 Hardware and Software Requirements A.1.1 Controller Support SAS3IRCU runs on the following platforms. X86 or X64-compatible United Extensible Firmware Interface (UEFI) 2 EM64T/AMD64 Sun SPARC® (v9) SAS3IRCU works with storage devices that are compliant with existing SCSI standards. SAS3IRCU supports the following LSI SAS3 controllers and the host bus adapters based on these controllers: LSISAS2004 LSISAS2008 LSISAS2108 LSISAS2208 LSISAS2304 LSISAS2308 LSI Corporation Confidential | August 2010 Page 31