ASRock X99 Extreme11 LSI Mega RAID Storage Manager Guide - Page 150
Importing or Clearing a Foreign Configuration
View all ASRock X99 Extreme11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Figure 146 Disable Drive Security option The Confirm Disable Drive Security screen appears. 3. To disable drive security, click Yes. The MegaRAID Storage Manager software disables drive security and returns you to the main menu. Note: If you disable drive security, you cannot create any new encrypted virtual drives and the data on all encrypted unconfigured drives will be erased. Disabling drive security will not affect the security or data of foreign drives. Importing or Clearing a Foreign Configuration A foreign configuration is a RAID configuration that already exists on a replacement set of drives that you install in a computer system. You can use the MegaRAID Storage Manager software to import the foreign configuration to the RAID controller or to clear the foreign configuration so you can create a new configuration using these drives. To import a foreign configuration, you must do the following: • Enable security to allow importation of locked foreign configurations. (You can import unsecured or unlocked configurations when security is disabled.) • Run a scan for foreign configurations. • If a locked foreign configuration is present and security is enabled, enter the security key and unlock the configuration. • Import the foreign configuration. Page 150 DB09-000202-05 37857-02 Using the MegaRAID Advanced Software Rev. F - May 2011 Copyright © 2011 by LSI Corporation. All rights reserved.