ASRock Z790 Steel Legend WiFi User Manual - Page 57
and 5 and go straight to Step
View all ASRock Z790 Steel Legend WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
2 1 Z790 Steel Legend WiFi 1 Step 3 Before installing a M.2 SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module. C B A C B A Step 4 Move the standoff based on the module type and length. The standoff is placed at the nut location C by default. Skip Step 4 and 5 and go straight to Step 6 if you are going to use the default nut. Step 5 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. 53
53
Z790 Steel Legend WiFi
Step 3
Before installing a M.2 SSD module,
please loosen the screws to remove
the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
Step 4
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location C by default. Skip Step 4
and 5 and go straight to Step
6
if you
are going to use the default nut.
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
2
1
1
A
B
C
A
B
C