ASRock Z87 Extreme9/ac User Manual - Page 53
Thunderbolt, Internal VGA
View all ASRock Z87 Extreme9/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Z87 Extreme9/ac 2.11 Thunderbolt This motherboard has two thunderbolt connectors that support video output from internal VGA. Due to 32-bit OS limitations, we strongly recommend using a 64-bit OS to bring ThunderBolt into full play. For thunderbolt display installation please follow the steps below: 1. Thunderbolt cables are provided by your monitor supplier. 2. Thunderbolt ports on this motherboard supports DisplayPort 1.2 Re-drive (Pass-Through) mode with HBR2 Data Rates. *If you are using a DP 1.2 monitor, plug it directly to the motherboard's thunderbolt port. If the DP 1.2 monitor is connected to a thunderbolt device which is hooked up to the motherboard's thunderbolt port, the monitor can only work as DP 1.1 monitor. Internal VGA If you want to use the internal VGA with the Thunderbolt ports, simply connect your monitor to either Thunderbolt port (see p.13, No. 14, 15) on the motherboard using a Thunderbolt cable. 47 English