Acer AL1702 AL1702W User's Guide - Page 6
Controls And Connectors, Cable Connections
View all Acer AL1702 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. 1 Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power cord into the PC port. 2. Connect one end of the 15-pin VGA cable to the back of the monitor and connect the other end to the computer's D-Sub port. 3. Turn on your monitor and computer. 1 2 Figure 2 Connecting Cables 1. Power Cable 2. Signal Cable 5
5
CONTROLS AND CONNECTORS
CABLE CONNECTIONS
Turn off your computer before performing the procedure below.
1
Plug the power cable of your monitor into a nearby outlet. Plug the other
end of the power cord into the PC port.
2.
Connect one end of the 15-pin VGA cable to the back of the monitor and
connect the other end to the computer’s D-Sub port.
3.
Turn on your monitor and computer.
Figure 2
Connecting
Cables
1.
Power Cable
2.
Signal
Cable
1
2