Acer Aspire 1430 Aspire 1400 Notebook Service Guide - Page 46
Advanced, Primary: Enables Hard Drive
View all Acer Aspire 1430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Advanced The Advanced screen contains parameters involving your hardware devices. The table below describes the parameters in the screen Settings in boldface are the default and suggested parameter settings. Parameter IDE Controller FDD controller Infrared Port (FIR) Base I/O address DMA Channel Description Options Configures the integrated local bus IDE adapter. Both: Enables CD-ROM and Hard Drive. Primary: Enables Hard Drive only Disabled: Disables the integrated local bus IDE adapter using options. Note: Depending on your operating system, disabling an unused device may help free system resources for other devices. Enables or disables the floppy disk controller. Enabled or Disabled Enables or disables the system's Infrared port. Enabled or Disabled Sets the I/O address and IRQ for Infrared port. 3F8, IRQ4/2F8, IRQ3/ 3E8, IRQ4/2E8, IRQ3 Sets a DMA channel for Infrared port. This field is hidden if Mode is not FIR. DMA3 or DMA1 40 Chapter 2