Acer Aspire 1430 Aspire 1400 Notebook Service Guide - Page 82
No beep Error Messages, FRU/Action in Sequence, Reconnect the DIMM.
View all Acer Aspire 1430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 71. Ensure every connector is connected tightly and correctly. Reconnect the DIMM. LED board. Main board. No beep, power-on indicator turns on and LCD is blank. Power source (battery pack and power adapter). See "Power System Check" on page 71. Reconnect the LCD connector Hard disk drive LCD inverter ID LCD cable LCD Inverter LCD Main board No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connectors. LCD inverter ID LCD cable LCD inverter LCD Main board No beep, power-on indicator turns on and a blinking cursor shown on LCD during POST. Ensure every connector is connected tightly and correctly. Main board No beep during POST but system runs correctly. Speaker Main board 76 Chapter 4