Acer Aspire 1810TZ Acer Aspire 1410, 1810T, and 1810TZ Service Guide - Page 37

Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information Main InsydeH20 Setup Utility Security Boot Exit System Time: System Date: System Memory: Total Memory: Video Memory: [19:10:59] [06/09/2009] 640 K 4096 MB [64MB] Rev. 3.5 Item Specific Help This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6 Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode [Enabled] [Enabled] [Disabled] [Enabled] [AHCI Mode] F1 Help ESC Exit Select Item F5/F6 Change Values F9 Setup Default Select Menu Enter Select SubMenu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Total Memory Video Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode Description Sets the system time. The hours are displayed with 24hour format. Sets the system date. This field reports system memory size. This field reports the memory size of the system. Memory size is fixed to 4096MB. Shows the video memory size. VGA Memory size=32 MB This will hide POST messages while booting. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Control the mode in which the SATA controller should operate. Format/Option Format: HH:MM:SS (hour:minute:second) Format MM/DD/YYYY (month/day/year) N/A N/A N/A Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Enabled Option: Enabled or Disabled Option: AHCI or IDE Chapter 2 27