Acer Aspire 5532 Acer Aspire 5532 Notebook Series Service Guide - Page 35

Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information M a i n System Time: System Date: System Memory: Extended Memory: Video Memory: PhoenixBIOS Setup Utility Security Boot Exit [09:00:00] [12/12/2008] 634 KB 1790 MB [256MB] Item Specific Help , , or selects field. Quiet Boot: Network Boot: F12 Boot Menu: D2D Recovery: SATA Mode: [Enabled] [Enabled] [Disabled] [Enabled] [IDE AHCI] F1 Help Esc Exit Select Item F5/F6 Change Values F9 Setup Defaults Select Menu Enter Select Sub-Menu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Parameter System Time System Date System Memory Extended Memory Video Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode Description Sets the system time. The hours are displayed with 24hour format. Sets the system date. This field reports the memory size of the system. This field reports the Extended Memory size. This field shows the memory allocated for the video graphics. Allows startup to skip certain tests while booting, decreasing the time needed to boot the system. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Control the mode in which the SATA controller should operate. Format/Option Format: HH:MM:SS (hour:minute:second) Format MM/DD/YYYY (month/day/year) N/A N/A N/A Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Enabled Option: Enabled or Disabled Option: AHCI or IDE Chapter 2 25