Acer Aspire 5739G Acer Aspire 5739G Series Service Guide - Page 111
Replacing the Thermal Module, Silmore GP50 - graphics card
View all Acer Aspire 5739G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
The following thermal compounds are approved for use: • Eapus XR-PE 1. Remove all traces of thermal grease or pad adhesive from the Thermal Module using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply a small amount of thermal grease or the supplied thermal pad to the centre of the heat sink. There is no need to spread grease manually, the force used during the installation of the Thermal Module is sufficient. 3. Place the CPU into the socket. Take note of the Pin 1 locator in the image below. 4. Turn the CPU socket latch 180 degrees clockwise to the Lock position. Replacing the Thermal Module IMPORTANT:Ensure all thermal pads are in place before replacing the Thermal Module. The following thermal pads are approved for use: • Silmore GP50 • Honeywell • Jet Motor 7762 The following thermal compounds are approved for use: • Eapus XR-PE 1. Remove all traces of thermal grease or pad adhesive from the Graphics Card and CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. Chapter 3 101