Acer Aspire 5810T Acer Aspire 5810T / 5810TG Series Service Guide - Page 36

Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. InsydeH20 Setup Utility Information Main Security Boot Exit System Time: System Date: System Memory: Extended Memory: Video Memory: Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode [14:53:38] [04/07/2009] 640 KB 2046 MB 256 MB [Enabled] [Enabled] [Enabled] [Enabled] [AHCI Mode] Rev. 3.5 Item Specific Help This is the help for the hour field. Valid range is from 0 to 23. REDUCE /INCREASE : F5/F6. F1 Help Esc Exit Select Item F5/F6 Change Values F9 Setup Default Select Menu Enter Select►Sub-Menu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory Video Memory Quiet Boot Network Boot F12 Boot Menu Description Sets the system time. The hours are displayed with 24-hour format. Sets the system date. This field reports the memory size of the system. Memory size is fixed to 640MB This field reports the memory size of the extended memory in the system. Extended Memory size=Total memory size-1MB Shows the video memory size. Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Format/Option Format: HH:MM:SS (hour:minute:second) System Time Format MM/DD/YYYY (month/day/ year) System Date Option: Enabled or Disabled Option: Enabled or Disabled Option: Disabled or Enabled 28 Chapter 2