Acer Aspire 8940G Acer Aspire 8940 Service Guide - Page 43

Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Information Main System Time: System Date: Total Memory: Video Memory: Quiet Boot: Network Boot: F12 Boot Menu: D2D Recovery: SATA Mode: Phoenix SecureCore(tm) Setup Utility Security Boot Exit [19:10:59] [01/09/2009] 4030 MB 512 MB [Enabled] [Enabled] [Disabled] [Enabled] [AHCI Mode] Item Specific Help This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6 Switchable Graphics: [SG Enabled] F1 Help ESC Exit Select Item F5/F6 Change Values F9 Setup Default Select Menu Enter Select SubMenu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Parameter System Time System Date Total Memory Video Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode Switchable Graphics Description Sets the system time. The hours are displayed with 24hour format. Sets the system date. Displays the total memory available. Displays the available memory for Video. Allows startup to skip certain tests while booting, decreasing the time needed to boot the system. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. Control the mode in which the SATA controller should operate. Enables or disables the switchable graphics mode. Format/Option Format: HH:MM:SS (hour:minute:second) Format MM/DD/YYYY (month/day/year) N/A N/A Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Enabled Option: Enabled or Disabled Option: AHCI or IDE Option: SG Enabled, UMA Only or Discrete Only Chapter 2 33