Acer Aspire G5900 Service Guide - Page 104

2-6:Create a"RAID Ready" System into" RAID 1" with two Hard Drives by 'Create RAID Volume '. Step 1:Install WIN7 OS with one SATA HDD. Step 2:Shut down the system,then add another two serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4:Click on the by'Create RAID Volume' to create a RAID volume. Step 5:Click "Next" at create a RAID volume window. Step 6:Key the name in "Volume Name" and select "RAID 1" in RAID Level. Step 7:At least select two HDDs as "Volume Location". Step 8:Specify Volume Size then press "next". Step 9:Press "next" to finish setup and start create RAID 1. Step 10:It may takes half and hours to create RAID 1.After create completely,it will ask to reboot to finish create RAID 1. 2-7:Create a"RAID Ready" System into" RAID 5" with two Hard Drives by 'Create RAID Volume '. Step 1:Install WIN7 OS with one SATA HDD. Step 2:Shut down the system,then add another three serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4:Click on the by'Create RAID Volume' to create a RAID volume. Step 5:Click "Next" at create a RAID volume window. Step 6:Key the name in "Volume Name" and select "RAID 5" in RAID Level. Step 7:At least select three HDDs as "Volume Location". Step 8:Specify Volume Size then press "next". Step 9:Press "next" to finish setup and start create RAID 5. Step 10:It may takes half and hours to create RAID 5.After create completely,it will ask to reboot to finish create RAID 5. 2-8:Create a"RAID Ready" System into" RAID 10" with two Hard Drives by 'Create RAID Volume '. Step 1:Install WIN7 OS with one SATA HDD. Step 2:Shut down the system,then add another four serial ATA hard drives in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console. Step 4:Click on the by'Create RAID Volume' to create a RAID volume. Step 5:Click "Next" at create a RAID volume window. Step 6:Key the name in "Volume Name" and select "RAID 10" in RAID Level. Step 7:At least select three HDDs as "Volume Location". Step 8:Specify Volume Size then press "next". Step 9:Press "next" to finish setup and start create RAID 10. Step 10:It may takes half and hours to create RAID 10.After create completely,it will ask to reboot to finish create RAID 10. Chapter 7 96