Acer Aspire G5900 Service Guide - Page 90

Chapter 7 Intel RAID SOP 1.INTEL® MATRIX STORAGE TECHNOLOGY CHECK(DOS) 1-1: Create SATA RAID 0 Step 1:Shut down the EUT, unplug the power cable,connect two SATA HDDS to EUT , check the EUT all devices are connect/plug ok. Step 2:Press "PWR-BTTN" to power on the EUT,Load BIOS default setting . Step 3:At "Integrated_Peripherals" page "OnChip SATA Type" item set is as "RAID" mode,save and exit. Step 4:During BIOS post, press to enter into Intel RAID setup utility,as picture1. Picture1 Step 5: Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a Raid , delete it ). Step 6:Create RAID 0 Mode,enter the RAID name,such as "MyRaid0",default is"Volume0". Picture2 chapter 7 82