Acer Aspire G5900 Service Guide - Page 92

Step 9:Press "Create Volume" to create RAID0,it will pop the warning message that all data will be lost,"press "Y" to confirm it. Picture5 Step 10:It will back to create RAID interface,then press "ESC" or select 4 to exit and install OS. 1-2: Create SATA RAID 1 Step 1:Shut down the EUT, unplug the power cable,connect two SATA HDDS to EUT , check the EUT all devices are connect/plug ok. Step 2:Press "PWR-BTTN" to power on the EUT,Load BIOS default setting . Step 4:During BIOS post, press to enter into Intel RAID setup utility. Step 5: Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a Raid , delete it ). Step 6:Create RAID 1 Mode,enter the RAID name,such as "MyRaid1",default is"Volume0". Step 7:Select "RAID1(Mirror)" at "RAID Level". Picture6 Chapter 7 84