Acer Aspire M1610 Aspire M1610-Veriton M261 Service Guide - Page 70

Jumper Settings This section explains how to set jumpers for correct configuration of the mainboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pins. System Board Jumper Setting Features Default setting Remark (color and other) On-board Jumper and CLR_CMOS(PIN2_3)1 2-3 : Normal (Default) 1-2 : Clear CMOS default setting (See Pin & default setting 2-3 : Normal (Default) definition for the detail) System Board Header Setting Front Panel Illustration Silk Screen FP1 Pin Signal Name Description 1 5V_SYS Hard disk LED pull-up(330 ohm) to 5V_SYS 2 GPIO_GRN_HDR_R Pull-up(330 ohm) to 5V_SB_SYS and connect to SIO GPIO 3 HDD_LED_R Hard disk active LED 4 GPIO_YLW_HDR_R Pull-up(330 ohm) to 5V_SB_SYS and connect to SIO GPIO 5 GND Reset button 6 PSIN Power Button 7 ICH_SYS_RSTJ ICH_SYS_RSTJ 8 GND Ground 9 5V_SYS 5V_SYS 10 KEY Key 11 NC Reserved. Do not use 12 5V_SB LAN LED pull-up(330 ohm) to 5V_SB 13 NC Reserved. Do not use 14 LAN_ACTJ Lan active LED Footprint Schematic Part h2x7mzo10h85 HEADER_2X7_10 62 Chapter 5