Acer ED320QR User Manual

Acer ED320QR Manual

Acer ED320QR manual content summary:

  • Acer ED320QR | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer ED320QR | User Manual - Page 2
    . Acer Incorporated. All Rights Reserved. Acer LCD Monitor User Guide Original Issue: 10/2017 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual
  • Acer ED320QR | User Manual - Page 3
    are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the Acer monitor is purposed for video and visual display of information obtained from electronic devices. Information for your safety and comfort Safety instructions Read these instructions
  • Acer ED320QR | User Manual - Page 4
    power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not
  • Acer ED320QR | User Manual - Page 5
    awllaytearfter following the operating • tinhsetrpurcotdiouncst has been dropped or the case has been damaged • the product exhibits a distinct change in performance, indicating a need for service • the product does not operate normally after following the operating instructions
  • Acer ED320QR | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include areas . Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment burden placed on the environment. We at Acer are very conscious of the environmental effects of
  • Acer ED320QR | User Manual - Page 7
    instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer
  • Acer ED320QR | User Manual - Page 8
    This product has been shipped enabled for power management: • Activate display's Sleep mode within 15 minutes of user inactivity. viii • • Activate computer's Sleep mode within 30 minutes of user inactivity. Wake the computer from Sleep mode by pushing the power button. This product has been
  • Acer ED320QR | User Manual - Page 9
    ix Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •
  • Acer ED320QR | User Manual - Page 10
    Contents Unpacking 1 Installing/removing base 2 Adjusting screen position 4 Connecting the power cord 5 Safety precautions 5 Cleaning the display 5 Connector pin assignment 7 Standard timing table 8 Installation 9 User control 10 Troubleshooting 20
  • Acer ED320QR | User Manual - Page 11
    Unpacking When you unpack the box, ensure that the following items are present, and retain the packing materials for future shipment. • LCD monitor • Quick start guide • Power adapter • DP cable • HDMI cable (optional) 1
  • Acer ED320QR | User Manual - Page 12
    Installing/removing base Note: Unpack the monitor and base first. Carefully place the monitor face down on a flat surface - use a cloth pad to prevent scratching the screen. 1. Attach the monitor stand arm to the base. 2. Secure the monitor to the arm of the monitor. Close the base cover. Note:
  • Acer ED320QR | User Manual - Page 13
    Follow these instructions to remove the base from the monitor. Note: Carefully place the monitor face down on a flat surface - use a cloth pad to prevent scratching the screen. 1. Remove the base cover. Release the 4 black screws with a screwdriver. 2. Removing the stand base from the monitor. 3
  • Acer ED320QR | User Manual - Page 14
    Adjusting screen position For the best viewing position, adjust the display tilt. • Tilt See the illustration below for an illustration of the tilt range. 5 20 4
  • Acer ED320QR | User Manual - Page 15
    . • To prevent damage to the monitor, do not lift the monitor using the stand. Cleaning the display When you clean the monitor, follow the instructions carefully. • Before cleaning, unplug the monitor's power adapter. • Use a soft cloth to gently wipe the screen and the front and sides of the case
  • Acer ED320QR | User Manual - Page 16
    • Do not use any ammonia- or alcohol-based cleaners on the LCD monitor screen or case. • Acer is not responsible for damage caused by the use of any ammonia- or alcohol-based cleaners. 6
  • Acer ED320QR | User Manual - Page 17
    Connector pin assignment 20-pin color display signal cable* 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 10 8 6 4 2 Threading Explanations Threading Explanations 1. Channel 0 real signal 11. Monitor ground 2. Monitor ground 12. Channel 3 auxiliary signal 3. Channel 0 auxiliary signal 13.
  • Acer ED320QR | User Manual - Page 18
    Standard timing table Mode IBM VGA IBM VGA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA STD VESA STD VESA STD VESA STD VESA STD VESA STD VESA STD VESA STD Resolution 720 × 400p 640 × 480p 640 × 480p 640 × 480p 800 × 600p 800 × 600p 800 × 600p 800 × 600p 1024 × 768p 1024 × 768p 1024 ×
  • Acer ED320QR | User Manual - Page 19
    Installation Follow these steps to install the monitor on your host system: Steps 1. Turn off your computer and unplug the power cord. 2. Connect digital cable (Dual input models only) a. Make sure the monitor and computer are powered off. b. Connect one end of the HDMI/DP cable to the back of the
  • Acer ED320QR | User Manual - Page 20
    User control Basic controls 1 2 3 4 5 Number 1 2 3 4 5 Icon Description Go to the main menu. Enter the source mode. Enter the switch mode menu. Enter brightness adjustment. On/off 10
  • Acer ED320QR | User Manual - Page 21
    Adjust OSD settings Note: The following is for general reference only. Actual product specifications may vary. OSD (On Screen Display) can be used to adjust the settings of the LCD display. Press the MENU button to open the OSD. Use the OSD to adjust image quality, OSD position, and general settings
  • Acer ED320QR | User Manual - Page 22
    Feature page Double-press Button 1 to select the menu function, and then use Buttons 1/2/3/4 to adjust the settings you need. When finished, use Button2 to return to the previous level or exit the menu. Picture adjustment 1. Double-press Button 1 to bring up the OSD. 2. Use Buttons 3/4 to select
  • Acer ED320QR | User Manual - Page 23
    6. Black Boost: This feature increases the richness of the display's dark levels black becomes less black. The higher the setting, the greater the increase. 7. Blue Light: Filter blue light by adjusting different blue light display ratios (80%, 70%, 60%, 50%). Note: The higher the value, the more
  • Acer ED320QR | User Manual - Page 24
    Color adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select Color from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4. Gamma Mode allows you to adjust the brightness and hue. The default value is
  • Acer ED320QR | User Manual - Page 25
    Volume adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select Audio from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4. Volume: Adjusts the volume. 5. Mute: Audio on or off. 15
  • Acer ED320QR | User Manual - Page 26
    can set Over Drive to one of the following three settings: (a) Extreme (b) Normal (c) Off. 5. FreeSync: Select on or off. FreeSync is only available on AMD-supported graphics cards. 6. Aim Point: Displays the aiming point on the screen for shooting games. 16
  • Acer ED320QR | User Manual - Page 27
    OSD adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select OSD from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4. Language: Set the OSD menu language. 5. OSD Timeout: Adjust the delay before
  • Acer ED320QR | User Manual - Page 28
    System adjustment 1. Double-click Button 1 to open the OSD. 2. Use Buttons 3/4 to select System from the OSD. Double-press Button 1 to navigate to the setting you want to adjust. 3. Use Buttons 3/4 to adjust the slider. 4. Input: Select an available source from the available input sources. 5. Auto
  • Acer ED320QR | User Manual - Page 29
    Product information 1. View the basic information of the machine. 2. Reset All Settings: Reset all settings to factory defaults. 19
  • Acer ED320QR | User Manual - Page 30
    Before sending your LCD monitor for repair, go through the troubleshooting checklist below to see if you can diagnose the problem. (DP mode) Problem Status Solution LED lights up • Press the standby button to turn on. No picture LED off LED flashes • Check the power switch. • Ensure
  • Acer ED320QR | User Manual - Page 31
    (HDMI mode) Problem Status LED lights up No picture LED off LED flashes Audio abnormal (only Audio No audio, or the input model) volume is too low (optional)
  • Acer ED320QR | User Manual - Page 32
    VialedelleIndustrie1/A,20020Arese(MI),Italy ED320QR ED320QR Aug. 02, 2019 2122
  • Acer ED320QR | User Manual - Page 33
    er/Importerisresponsi bleforthisdeclaration: Pr oduct: ModelNumber : L CD Monitor ED320QR SK UNumber : ED320QR xxxxxx ("x"=0~9,a~z,orA~Z) NameofResponsibleParty: AddressofResponsibleParty: AcerAmericaCorporation 333WestSanCarlosSt. Suite1500 SanJose,CA95110
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

Acer LCD Monitor
User's Guide