Acer ET2 User Manual - Page 24
Over Drive: Select Off, Normal, or Extreme., Language: Set the OSD menu language.
View all Acer ET2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English 4. Over Drive: Select Off, Normal, or Extreme. 5. FreeSync: To control support FreeSync or not, default is On Note: 1. If FreeSync is "ON", then the Over Drive selection is set to "Normal" automatically. 2. If FreeSync is "OFF", then the user can set Over Drive to either one of the three settings including: (a) Extreme (b) Normal (c) Off. 6. Aim point: Show an Aim point on the screen for shooting games. OSD Picture Color Audio Gaming OSD System Mode - Standard Language OSD Timeout Transparency Refresh Rate Num English 120 Off Off Move Enter 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales. 4. Language: Set the OSD menu language. 5. OSD timeout: Adjust the delay before turning off the OSD menu. 6. Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%. 7. Refresh rate num: Display the panel's current refresh rate on the screen Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.