Home » Acer Manuals » Laptops » Acer Ferrari 5000 » Manual Viewer

Acer Ferrari 5000 Ferrari 5000 Service Guide - Page 82

Disassembling the LCD Module, Then take out the LCD assembly from the LCD cover.

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Disassembling the LCD Module 1. Remove the six screw caps on the LCD bezel. 2. Then remove the six screws fastening the LCD bezel to the LCD module. 3. Carefully detach the LCD bezel from the LCD module. 4. Detach the microphone from the LCD bezel. 5. Disconnect the LVDS cable and LCD cable from the inverter then remove the inverter. 6. Disconnect the CCD cable and the LCD cable. 7. Remove the four screws fastening the LCD assembly to the LCD cover. 8. Then take out the LCD assembly from the LCD cover. 9. Tear off the foil attach onto the wireless antenna set to the LCD cover. Please detach the foil on both side. 10. Remove the two screws holding the wireless antenna set to the LCD cover. 73 Chapter 3

Section	Page
SG_F5000_CH1.pdf	10
Platform	10
System Memory	10
Display and Graphics	10
Audio	11
Storage Subsystem	11
Communication	11
Input Devices	11
I/O Interface	12
Power Subsystem	12
Dimensions and Weight	12
Environment	12
Block Diagram	13
Norton AntiVirus	47
How do I check for viruses?	47
Hardware Specification and Configuration	48
SG_F5000_CH2.pdf	58
Information	59
Main	60
Advanced	61
Security	63
Boot	65
Exit	66
BIOS Password Removal SOP	67
HDD Password Removal SOP	69
SG_F5000_CH4.pdf	87
External CD-ROM Drive Check	87
Keyboard or Auxiliary Input Device Check	87
Power System Check	88
Check the Power Adaptor	88
Check the Battery Pack	88
Touchpad Check	89
Power-On Self-Test (POST) Error Message	90
Index of Error Messages	90
POST Code	93
Index of Symptom-to-FRU Error Message	94
Intermittent Problems	99
Undetermined Problems	100
Bottom Side	101
Jumper Setting SOP	105

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.