Acer H5383BD User Guide - Page 50
Setting, Startup Screen, Screen Capture, Source Lock
View all Acer H5383BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
English 40 Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI. Setting Startup Screen Screen Capture Use this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use the memorized picture from the "Screen Capture" function. Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section. • Change the "Startup Screen" from the default setting "Acer" to "User". • Select "Screen Capture" to customize the startup screen. • A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose "No" to cancel the screen capture and exist the Onscreen Display (OSD). • A message appears stating that the screen capture is in progress. • When the screen capture is finished, the message disappears and the original display is shown. Source Lock In the unlikely event that the capturing action fails, change the resolution of your target picture to 800 x 600. Selecting "On" enables the function and when switching input signals, you need to press "SOURCE" on the control panel or remote control, or the direct source key on the remote control. When this function is disabled, the projector will detect your source automatically.