Acer K137i Instruction Manual - Page 32
Problems with the Projector, Condition, Solution
View all Acer K137i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
22 English 9 Image is too small • Adjust the zoom ring on the top of the projector. or too large • Move the projector closer to or further from the screen. • Press "MENU" on the remote control or on the control panel. Go to "Image --> Aspect Ratio" and try different settings. 10 Image has slanted • If possible, reposition the projector so that it is sides centered on the screen. • Press the "Keystone" on the OSD until the sides are vertical. 11 Image is reversed • Select "Image --> Projection Mode" on the OSD and adjust the projection direction. Problems with the Projector # Condition Solution 1 The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord and wait at least 30 seconds before reconnecting power.