Acer PD113P PD113P User's Guide EN - Page 12

Installation Powering Off the Projector 1. Press the " " button to turn off the projector lamp, you will see a message "Please press power button again to complete the shutdown process. Warning: DO NOT unplug while the projector fan is still running." displayed on the projector's screen. Press the " " button again to confirm, otherwise the message will disappear after 5 seconds. 2. The cooling fans continue to operate for about 60 seconds for cooling cycle and the Power LED will keep blue. When the Power LED begins flashing, the projector has entered standby mode. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press " " button to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector. 4. Do not turn on the projector immediately following a power off procedure. Warning Indicator When the "LAMP" indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the "TEMP" indicator lights solid red for about 20 seconds, it indicates the projector has been overheated. The projector will automatically shut itself down. Under normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center. When the "TEMP" indicator solid red for about 10 seconds, Please contact your local dealer or our service center. English...12