Acer PD525 PD525 Service Guide - Page 30

Chapter 3 Machine Disassembly and Replacement This section provides disassembly procedures for PD525 Micro Portable XGA DMD Projector. Before you begin any of these procedures, be sure to turn off the power, computer system, and other attached devices; then disconnect the power cable from the electrical outlet. Moreover, when you disassemble the projector, be sure to put the screws in a safe place and separate them according to their category. Tool Needed Item PHOTO Long Nose Nipper (Left) Angle Cutting Nipper (Right) Hex Sleeves 5mm (Top) Screw Bit (-) 101 Wrench #8 Screw Bit (+) : 107, 102, 101 (from top to bottom) General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following precedures: 1. Turn off the power of the system and all the peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3. Anti-static wrist strap. 25 Chapter 3