Acer S5301WM User Manual - Page 40
Enter the LAN Setting menu. The, Enter Administrator Password. The next level menu, is displayed.
View all Acer S5301WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
English 30 To connect your projector to the network: 1 Take a RJ45 cable and connect one end to the LAN input jack of the projector and the other end to the RJ45 port. 2 Enter the LAN Setting menu. The "Enter Administrator Password" dialogue box is displayed. 3 Enter "Administrator Password". The next level menu is displayed. The factory default of "Administrator Password" is "1234". You can change it in the Setting > Security > Administrator Password menu. LAN Setting (for P5403/ N243/PN-SX12) 4 Select LAN in this menu and press to select "On". 5 Make sure DHCP is on, and press press . to select Apply and 6 Re-enter the menu and note down the IP address displayed in the row of Projector IP Address. If your are not in a DHCP environment, set DHCP to "Off" and contact your ITS administrator for information on Projector IP Address, Subnet Mask, Default Gateway, and DNS Server. 1 Press to select Projector IP Address and press . 2 Press to move the cursor and press to enter the digits. 3 When you finish, press MENU to save and exit the menu. 4 Repeat steps 1-3 to input addresses for Subnet Mask, Default Gateway, DNS server. 5 Press to highlight Apply and press . LAN Reset (for P5403/ N243/PN-SX12) To control the projector remotely: 1 Enter the Projector IP address in the address bar of the web browser on your computer. 2 The remote network operation page is displayed.You can control the projector by using this page. For details, see the notes following this table. Press after choosing "Yes" to return all items on the Tools page to the default settings.