Acer TravelMate 2300 TravelMate 2300/4000/4500 Service Guide - Page 49

Advanced The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system. PhoenixBIOS Setup Utility Info. Main Advanced Security Boot Exit Internal Touchpad: Infrared Port (FIR): [Both] [Enabled] Item Specific Help Configure Infrared Port using options: [Disable] No configuration [Enabled] User configuration [Auto] BIOS or OS chooses configuration (OS Controlled) Displayed when controlled by OS F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu F5/F6 Change Values Enter Select 4 Sub- Menu F9 Setup Defaults F10 Save and Exit The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings. . Parameter Infrared Port Parallel Port Mode Base I/O address Interrupt DMA channel Description Options Enables, disables or auto detects the infrared port. Disabled/Disabled/Auto Enables, disables or auto detects the parallel port. Enabled/Disabled/Auto Sets the operation mode of the parallel port. ECP, EPP, Output only or Bi- directional Sets the I/O address of the parallel port. 378/278 Sets the interrupt request of the parallel port. IRQ7/IRQ5 Sets a DMA channel for the printer to operate in DMA3/DMA1 ECP mode. This parameter is enabled only if Mode is set to ECP. 42 Chapter 2