Acer TravelMate 3200 TravelMate 3200 Service Guide - Page 48

Advanced The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system. PhoenixBIOS Setup Utility Info. Main Advanced Security Boot Exit Serial Port Parallel port: Mode: Internal Touchpad: Infrared Port (FIR): [Auto] [Auto] [ECP] [Both] [Enabled] Item Specific Help Configure Infrared Port using options: [Disable] No configuration [Enabled] User configuration [Auto] BIOS or OS chooses configuration (OS Controlled) Displayed when controlled by OS F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu F5/F6 Change Values Enter Select 4 Sub- Menu F9 Setup Defaults F10 Save and Exit The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings. Parameter Parallel Port Mode Base I/O address Interrupt DMA channel Internal Touchpad Infrared Port (FIR) Description Options Enables, disables or auto detects the parallel port. Enabled/Disabled/Auto Sets the operation mode of the parallel port. ECP, EPP, Normal or Bi-directional Sets the I/O address of the parallel port. This parameter is enabled only if Mode is set to ECP or Bi-directional. This parameter is enabled only if Mode is set to ECP. 378h/278h/3BCH Sets the interrupt request of the parallel port. IRQ7/IRQ5 Sets a DMA channel for the printer to operate in DMA3/DMA1 ECP mode. This parameter is enabled only if Mode is set to ECP. Determines whether or not to disable the internal pointing device as the PS/2 mouse is connected. Both or Auto Enables, disables or auto detects the infrared port. Disabled/EnabledDisabled/Auto 40 Chapter 2