Acer TravelMate 4060 TravelMate 4060 Service Guide - Page 62
Disassembling the LCD Module, Removing the LCD Bezel
View all Acer TravelMate 4060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Disassembling the LCD Module Removing the LCD Bezel 1. See "Removing the Battery" on page 46. 2. See "Removing the Middle Cover" on page 50. 3. See "Removing the Keyboard" on page 50. 4. See "Removing the Fan, the CPU Thermal Module and the CPU" on page 50. 5. See "Removing the Wireless LAN Card" on page 51. 6. See "Removing the LCD Module" on page 51. 7. Detach the two rubber pads and the two screw pads. 8. Remove the four screws securing the LCD bezel. 9. Detach the LCD bezel carefully. 10. Remove the nine screws securing the LCD to the LCD panel. 11. Take out the LCD assembly from the LCD panel. 12. Disconnect the LCD inverter cable. 13. Discnnect the LCD inverter board. 14. Turn over the LCD. 15. Disconnect the LCD cable. 16. Remove the four screws securing the right LCD bracket, then remove the right bracket. 17. Remove the four screws securing the left LCD bracket, then remove the left bracket. 53 Chapter 3