Acer TravelMate P245-MP Shipping Document
Acer TravelMate P245-MP Manual
View all Acer TravelMate P245-MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer TravelMate P245-MP manual content summary:
- Acer TravelMate P245-MP | Shipping Document - Page 1
- Acer TravelMate P245-MP | Shipping Document - Page 2
- Acer TravelMate P245-MP | Shipping Document - Page 3
- Acer TravelMate P245-MP | Shipping Document - Page 4
- Acer TravelMate P245-MP | Shipping Document - Page 5
T0590) 1.Test Item: Altitude simulation (T1) 2.Test Purpose: This test simulates air transport under low-pressure conditions. 3.Test Procedure: Test cells and batteries shall be stored at a pressure of 11.6kPa or less for at least six hours at ambient temperature(20±5 ). SANYO Internal Procedure: As - Acer TravelMate P245-MP | Shipping Document - Page 6
integrity and internal electrical connections. The test is conducted using rapid and extreme temperature changes. 3.Test Procedure: Test cells and batteries are to be stored for at least six hours at a test temperature equal to 75±2 , followed by storage for at least six hours at a test - Acer TravelMate P245-MP | Shipping Document - Page 7
(Model:3UR18650-2-T0590) 1.Test Item: Vibration (T3) P.5/10 2.Test Purpose: This test simulates vibration during transport. 3.Test Procedure: Cells and batteries are firmly secured to the platform of the vibration machine without distorting the cells in such a manner as to faithfully transmit - Acer TravelMate P245-MP | Shipping Document - Page 8
possible impacts during transport. 3.Test Procedure: Test cells and batteries shall be secured to the testing machine by means of a rigid mount which will support all mounting surfaces of each test battery. Each cell or battery shall be subjected to a half-sine shock of pack acceleration - Acer TravelMate P245-MP | Shipping Document - Page 9
must be observed for a further six hours for the test to be concluded. SANYO Internal Procedure: As above. 4.Test Requirements: External temperature of test batteries does not exceed 170 and there is no disassembly,no rupture and no fire within six hours of this test. 5.Test Date: 2007/10/25 - Acer TravelMate P245-MP | Shipping Document - Page 10
flat surface and the 15.8mm diameter curved surface lying across its center. SANYO Internal Procedure: As above. 4.Test Requirements: External temperature of test batteries does not exceed 170°C and there is no disassembly and no fire within six hours of this test. 5.Test Date: 2007/10/05 6.Test - Acer TravelMate P245-MP | Shipping Document - Page 11
voltage is not more than 18V,the minimum voltage of the test shall be the lesser of two times the maximum charge voltage of the battery or 22V. (b) when the manufacturer's recommended charge voltage is more than 18V, the minimum voltage of the test shall be 1.2 times the maximum charge voltage - Acer TravelMate P245-MP | Shipping Document - Page 12
: Each package is capable of withstanding a 1.2 meter drop test in any orientation without damage to cells or batteries contained therein, without shifting of the contents so as to allow battery to battery (or cell to cell) contact and without release of contents. 5.Test Date: 2009/11/18 6.Test