Acer TravelMate P2510-MG ErP Energy-related Product directive technical docume - Page 4

Description of how sleep mode was selected or programmed EN 62623:2013 - Desktop and notebook computers - Measurement of energy consumption: 5.2. Test setup; 5.3.3. Measuring sleep mode. EN 62623:2013 - Desktop and notebook computers Description of how off mode was selected - Measurement of energy consumption: or programmed 5.2. Test setup; 5.3.2. Measuring off mode. ENERGY STAR® Program Requirements Product Sequence of events required to reach the Specification for Computers, Eligibility Criteria mode where the equipment automatically Version 6.0, Rev. Oct-2013: changes to sleep mode 1.D.4 Sleep Mode. Sequence of events required to reach the mode where the equipment automatically Not applicable changes to off mode The duration of idle state condition before the computer automatically reaches sleep mode, or another condition which does 30 minutes not exceed the applicable power demand requirements for sleep mode The length of time after a period of user inactivity in which the computer automatically reaches a power mode that 30 minutes has a lower power demand requirement than sleep mode The length of time before the display sleep mode is set to activate after user inactivity 10 minutes User information on the energy-saving potential of power management functionality User information on how to enable the power management functionality Test parameter for ambient temperature Test parameter for test voltage Test parameter for frequency Test parameter for total harmonic distortion of the electricity supply system http://www.energystar.gov/index.cfm?c=power_mgt.p r_power_mgt_users http://www.energystar.gov/index.cfm?c=power_mgt.p r_power_mgt_users 25 ℃ 230 V 50 Hz 3 %