Acer VG242YP User Manual - Page 13
Attaching/removing the base
 |
View all Acer VG242YP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Attaching/removing the base 45&1 45&1 Installation: Align the base with the stand and push the base towards the top of the monitor, and then rotate the base clockwise. Tighten the screw clockwise. Remove: 1. Reverse the steps to remove the base. 2. Use a screwdriver to press the shrapnel of back cover to remove the stand at the same time. Note: Take care when performing the installation to avoid injuring yourself. If installing with a wall mounting kit, install 2 extension columns into the copper stud in the back cover (as below picture), it is recommended to use VESA mounting kit (100 x 100) with M4 x 10(L) mm screws to fix your monitor on the wall. 2
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
2
Attaching/removing the base
STEP 1
STEP 2
Installation: Align the base with the stand and push the base towards the top of the monitor,
and then rotate the base clockwise. Tighten the screw clockwise.
Remove:
1. Reverse the steps to remove the base.
2. Use a screwdriver to press the shrapnel of back cover to remove the stand at the
same time.
Note:
Take care when performing the installation to avoid injuring yourself.
If installing with a wall mounting kit, install 2 extension columns into the copper stud in the
back cover (as below picture), it is recommended to use VESA mounting kit (100 x 100) with
M4 x 10(L) mm screws to fix your monitor on the wall.