Acer Veriton 2800 Veriton 2800 Service Guide - Page 29

The following table describes the parameters found in this menu: Date Parameter Description Lets you set the date following the weekdaymonth-day-year format Options Week : from Sun. to Sat., determined by BIOS and is display only Month : from Jan. through Dec. Day : from 1 to 31 ( or the maximum allowed in the month) Year : from 1999 to 2098 Time IDE channel 0/1 Master, Slave Video Lets you set the time following the hour-minutesecond format The items format is . The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00 Allows you to configure the hard disk drive connected to the master port of IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE CD-ROM is always automatically detected. IDE HDD Auto-Detection Press [Enter] to select this option for automatic device detection. IDE Primary/Secondary Master, Slave IDE Device Setup. You can use one of three methods: Auto : Allows BIOS to automatically detect IDE devices during POST (default) None : Select this if no IDE devices are used and the system will skip the automatic detection step and allow for faster system start up Manual : User can manually input the correct settings Access Mode : Use this to set the access mode for the hard drive. the four options are: CHS/LBA/Large/Auto (default: Auto) T Cylinder : Number of cylinders T Head : Number of heads T Precomp : Write precomp T Landing Zone : Landing Zone This item allows user to select the video mode. T Sector : Number of sectors Access Mode allows you to select the access mode. The options are CHS, LBA, Large, and Auto. EGA/VGA CGA 40 CGA 80 MONO 22 Chapter 2