Acer Veriton 2800 Veriton 2800 Service Guide - Page 32

Parameter Description Options Hard Disk Boot Priority Press [Enter] to enter the sub menu to select Hard Disk Boot Device Priority. Use wx to select a device, then press to move it up, or < - > to move it down the list. Virus Warning This feature allows you to enable the VIRUS warning function for IDE Hard Disk boot sector protection. If this function is enabled and there is someone attempt to write data into this area, BIOS will show a warning message on screen and the alarm will beep. Enabled Disabled Silent Boot This features allows you to enable or disable if Enabled the screen logo to display or no during POST Disabled Quick Power On Self Test This feature allows the system to skip certain tests while booting. When this function is enabled, it will decrease the time needed to boot the system, which means to quick power on self test function Enabled Disabled First / Second / Third Boot Device The item allows you to set the sequence of boot Floppy, LS120, Hard Disk, CD-ROM, device where BIOS attempts to load the disk ZIP, USB-FDD, USB-ZIP, USB- operating system. CDROM, USB-HDD, LAN, Disabled Boot other Devices This item allows you to enable or disable to boot Enabled from other device Disabled Boot Up NumLock Status This item allows you to enable or disable to set Enabled keyboard is number keys or arrow keys Disabled Gate A20 Option This option is used to set up the A20 signal control necessary for access to the 1MB memory. Fast : Let chipset control Gate 20 Normal : A pin in the keyboard controller Security Option Select whether the password is required every time the system boots or only when you enter setup. System Setup Configuration Table This feature allows you to enable or disable if showing summary screen or not Enabled Disabled Hidden Setting Description APCI Mode This option is used to set up enable or disable Enabled the APCI funtion Disabled Bootblock Write Protect Enabled Disabled Chapter 2 25