Acer Veriton D430 Generic User Guide - Page 18
Connecting the power cable, Turning on your computer
View all Acer Veriton D430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
8 Connecting the power cable 2 Setting up your computer English Caution: Before you proceed, check the voltage range in your area. Make sure that it matches your computer's voltage setting. If they don't match, change your computer's voltage setting according to your area's voltage range. Set the voltage selector switch to the voltage range applicable to your area. Plug the power cable into the power cable socket located on the rear panel of your computer. Then plug the other end of the power cable into a power outlet. Turning on your computer After connecting the necessary peripherals and plugging in the power cable, you are now ready to turn the computer on and get to work. To turn on your computer: 1 Turn on all peripherals connected to your computer, such as the monitor, printer, speakers, etc. 2 On the front panel of your computer, press the power button. Important: Make sure that the power cable is properly plugged into an electrical outlet. If you are using a power strip or an AVR (AutoVoltage Regulator), make sure that it is plugged in and turned on. Turning off your computer If you cannot shut down your computer normally, press and hold the power button for at least four seconds. Quickly pressing the button may put the computer in suspend mode only.