Home » Acer Manuals » Laptops » Acer Aspire 1350 » Manual Viewer

Acer Aspire 1350 Aspire 1350 Service Guide - Page 39

boldface, Enabled, because the user is not allowed to control the settings in these cases. - boot usb

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date System Memory Extended Memory Video Memory Quiet Boot Power on display LCD Auto Dim F12 Boot Menu Legacy USB Support Description Format/Option Sets the system time. Format: HH:MM:SS (hour:minute:second) System Time Sets the system date. Format: MM/DD/YYYY (month/day/ year) System Date This field reports the memory size of the system. The user can not change the memory setting. This is display-only field. Memory size is fixed to 640 KB This field reports the memory size of the extended memory in the system. The user can not change the memory setting. This is displayonly field. Extended Memory size=Total memory size -1MB The total amounts of memory for VGA. The user can not change the memory setting. This is display-only field. Determines if Logo will be displayed or not; shows diagnostic screen is disabled or enabled. Enabled: Logo is displayed, and diagnostic screen is disabled. Disabled: Logo is not displayed, and diagnostic screen is enabled. Option: Enabled or Disabled Selects display device. Auto: During power process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector). Option: Auto or Both Determines if the system will automatically dim Option: Enabled or Disabled the LCD brightness in order to save power when AC is not present. Selects the F12 boot menu function. Option: Enabled or Disabled Selects legacy USB support. Option: Enabled or Disabled NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. Chapter 2 31

Section	Page
Ch1	9
Features	9
System Block Diagram	11
Board Layout	12
Top View	12
Bottom View	13
Outlook View	14
Front View	14
Left Panel	15
Right Panel	16
Rear Panel	17
Bottom Panel	18
Indicators	19
Keyboard	20
Special keys	20
Touchpad	24
Touchpad Basics	24
Launch Keys	25
Hardware Specifications and Configurations	26
Ch2	35
BIOS Setup Utility	35
Navigating the BIOS Utility	36
Information	37
Main	38
Advanced	40
Security	41
Boot	45
Exit	46
BIOS Flash Utility	47
System Diagnostic Diskette	47
Ch3	49
General Information	50
Before You Begin	50
Disassembly Procedure Flowchart	51
Removing the Memory/MDC (Modem/Bluetooth)/HDD Module	54
Removing the Keyboard/ODD Module/FDD Module	55
Disassembling the Main Unit	57
Disassembling the LCD Module	62
Disassembling the External Modules	65
Disassembling the HDD Module	65
Disassembling the Floppy Disk Drive Module	65
Disassembling the Optical Drive Module	66
Ch4	67
System Check Procedures	68
External Diskette Drive Check	68
External CD-ROM Drive Check	68
Keyboard or Auxiliary Input Device Check	69
Memory Check	69
Power System Check	69
Touchpad Check	70
Power-On Self-Test (POST) Error Message	71
Index of Error Messages	72
Index of Symptom-to-FRU Error Message	74
Intermittent Problems	78
Undetermined Problems	79
Ch5	81
Top View	81
Bottom View	82
Ch6	83
This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of Aspir...	83
Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information availa...	83
Exploded Diagram	84
THE Base	84
LCD 14.1” / 15.0”	84
Main Board	85
Module	85
Top	86
AppA	96
Aspire 1350 series	96
Microsoft Windows XP (Home) Environment Test	100

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.