Adaptec 39320A-R Installation Guide - Page 9

Connecting External SCSI Devices You can connect external Ultra320/160 and Ultra2 SCSI devices to the 68-pin external LVD/SE VHDCI SCSI connectors. Each external device will require a 68-pin VHDCI external LVD SCSI cable. Note: We recommend that you do not combine older SCSI devices with the newer Ultra320/160 and Ultra2 SCSI devices on the same SCSI channel of the Adaptec SCSI Card 39320A. Follow these steps to connect your external SCSI devices: 1 Connect one end of an external SCSI cable to one of the external Ultra320/160 connectors on the Adaptec SCSI Card 39320A. 68-pin external LVD/SE VHDCI SCSI connectors VHDCI External LVD SCSI cable 2 Connect the other end of the cable to a SCSI connector on the back of an external device. If you are installing only one external device, terminate the device and skip to Step 4. SCSI terminator 8 4 4