Adaptec 51245 User Guide - Page 12

Chapter 2: Using the Command Line Utility ● 12 ARCCONF Commands Perform the following functions from the command line: atapassword copyback create datascrub delete driverupdate failover getconfig ARCCONF COMMANDS getlogs rescan setname getsmartstats resetstatisticscounters setncq getstatus romupdate setperform getversion savesupportarchive setpower identify setalarm setpriority imageupdate setcache setstate key setconfig setstatsdatacollection modify setmaxiqcache task Note: In the online command syntax, indicates a required parameter and [] indicates an optional parameter. arcconf atapassword Sets or clears the Secure Erase password for SATA drives. See arcconf task on page 27 for more information about Secure Erase. Syntax ARCCONF ATAPASSWORD SET ... ARCCONF ATAPASSWORD CLEAR ... Parameters new password|current password is the case-senstive password string. Channel/ID lists the space-delimited channel number and device number (ID) pairs for each drive on which to set or clear the password. Examples ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1 ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1 arcconf copyback Enables or disables the copyback feature, which attempts to keep drives in the original slot order after rebuilds. Syntax ARCCONF COPYBACK Parameters Controller# is the controller number On enables the copyback feature Off disables the copyback feature