Airlink AGSW801 Quick Installation Guide - Page 5
Troubleshooting
View all Airlink AGSW801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Section 3 Troubleshooting 1. Power LED is not lit • Check if the power adapter is properly connected to the power outlet. Make sure the power jack is firmly plugged into the power socket of the switch. 2. Link/Activity is not lit when connect to 10/100/1000Mbps device • Check the power switch of the network device attached to the switch; make sure it is turned ON. • Check the network cable; make sure it is properly connected to the switch and the network device. • Check the network cable; make sure the UTP cables comply with the specifications described in Section 2.
Troubleshooting
1.
Power LED is not lit
•
Check if the power adapter is properly connected to the power outlet.
Make sure the power jack is firmly plugged into the power socket of
the switch.
2.
Link/Activity is not lit when connect to 10/100/1000Mbps device
•
Check the power switch of the network device attached to the switch;
make sure it is turned ON.
•
Check the network cable; make sure it is properly connected to the
switch and the network device.
•
Check the network cable; make sure the UTP cables comply with the
specifications described in Section 2.
Section 3