Airlink APSUSB1 Manual - Page 12
Internal Firmware.
View all Airlink APSUSB1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
USB LED Pattern Flash slowly Steady on 1 long - 2 short 1 long - 3 short 1 long - 5 short 1 long - 6 short 1 long - 7 short 1 long - 11 short 1 long - 18 short Error Type Firmware reload required DRAM error Timer INT error Flash protected Flash erase/program error LAN controller error LAN memory error LAN I/O base error USB controller error In the event of a 'Firmware Reload Required' error at startup, proceed according to instructions given in the PS Admin User's Guide ("PS Admin Administration" section, under the heading "Upgrading the Print Server's Internal Firmware"). In the event that any of the other listed error conditions is encountered on startup, contact your dealer for correction of the fault. - 12 -
- 12 -
USB LED Pattern
Error Type
Flash slowly
Firmware reload required
Steady on
DRAM error
1 long - 2 short
Timer INT error
1 long - 3 short
Flash protected
1 long - 5 short
Flash erase/program error
1 long - 6 short
LAN controller error
1 long - 7 short
LAN memory error
1 long - 11 short
LAN I/O base error
1 long - 18 short
USB controller error
In the event of a ‘Firmware Reload Required’ error at startup, proceed
according to instructions given in the
PS Admin User’s Guide
("PS Admin
Administration" section, under the heading "Upgrading the Print Server's
Internal Firmware").
In the event that any of the other listed error conditions is encountered on
startup, contact your dealer for correction of the fault.