Airlink AR695W User Manual - Page 85
Configuration on Static Routing
UPC - 658729081796
View all Airlink AR695W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
For Example: AR695W Configuration on Static Routing Destination Subnet Mask Gateway Hop 192.168.1.0 255.255.255.0 192.168.123.216 1 192.168.0.0 255.255.255.0 192.168.123.103 1 Enabled √ √ When Client3 wants to send an IP data gram to 192.168.0.2, it will use the above table to determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to 192.168.1.11, it will go via 192.168.123.216 Parameter Dynamic Routing Description Routing Information Protocol (RIP) will exchange information about destinations for computing routes throughout the network. Please select RIPv2 only if you have different subnet in your network. Otherwise, please select RIPv1 if you need this protocol. 81
81
For Example:
Configuration on Static Routing
Destination
Subnet Mask
Gateway
Hop
Enabled
192.168.1.0
255.255.255.0
192.168.123.216
1
√
192.168.0.0
255.255.255.0
192.168.123.103
1
√
When Client3 wants to send an IP data gram to 192.168.0.2, it will use the above table to
determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to
192.168.1.11, it will go via 192.168.123.216
Parameter
Description
Dynamic Routing
Routing Information Protocol (RIP) will exchange information
about destinations for computing routes throughout the network.
Please select RIPv2 only if you have different subnet in your
network. Otherwise, please select RIPv1 if you need this
protocol.
AR695W