Airlink AWLH3025 Manual - Page 18

Preferred SSID Type in the SSID of the target device you want to connect to. BSS Type You can select the connection type: Peer-to-Peer, Access Point or Auto Mode. Tx Rate You can select the data rate or set to auto mode from the pull-down menu. Channel Select the channel you want to use. Power Mode No Power Save：the adapter will be in full active mode. Max Power Save：the power save mode will be enabled. 4x Config Select to disable or enable the TI-Based 4x function. Tx Power Select the transmit power level: Low Power, Medium-Low Power, Level Medium Power, Medium-High Power, High Power. The power level function is used to extend the communication distance. Mode Select from 802.11b, 802.11b+, 802.11g, or B&G Mode (If you choose this option the wireless network adapter will automatically select the suitable standard). Profile Enter the profile name and click the Save button to save your configuration, To open the profiles you saved, select the profile from the pull-down menu and then click the Load button. - 14 -