Alpine CDE-135BT Owners Manual - Page 25

1 Press f. The outgoing method list is displayed. 2 Turn the Rotary encoder to select the outgoing mode. Setting contents: VOICE DIAL / DIALED / RECEIVED / MISSED / PHONE BOOK VOICE DIAL: Voice dial operation DIALED: Dialed history RECEIVED: Received history MISSED: Missed incoming history PHONE BOOK: Mobile phone book 3 Press ENTER. The outgoing mode is activated, and each mode list is displayed. Note • It may take some time for the list to be displayed, and also directly after connection, the list may not be brought up to date. 4 Turn the Rotary encoder to select a name or a telephone number from the list. Note • You can use Phone book alphabet search function to search a name or number from Phone Book. For details, refer to "Phone book alphabet search function" on page 26. 5 Press ENTER. The selected telephone number will be called. If one name has several numbers registered in the telephone book, press ENTER after selecting the name*, then turn the Rotary encoder to choose the desired number and press ENTER, the telephone will be called. Press and hold ENTER for at least 2 seconds after selecting the name, the default number of the name will be called. Depending on the connected mobile phone, this function may not be performed. * If the name cannot be recognized, default number will be displayed. Notes • Press  to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. • The names registered in the telephone book are displayed. If the name is not registered, a number is displayed. If both name and number cannot be displayed, "ID UNSENT" will be displayed. • If you place a call directly from the paired mobile phone, the phone number is not displayed, you cannot redial from the unit in this case. Voice Dial Operation You can make a call using voice commands.  Setting item: VOICE DIAL When the VOICE DIAL mode is activated, "SPEAK" is displayed. Say the telephone number*, name* you want to call into the microphone. * This message depends on the voice tag prestored in the mobile phone. Notes • You can perform this operation only when a voice dial compatible mobile phone is connected. If the mobile phone is not compatible with the voice dial, "NO SUPPORT" is displayed for 2 seconds. • The Voice Dial function performance depends on the recognition range of the mobile phone and mounting location of the microphone. Please pay attention when the microphone is mounted. • Voice dial operation depends on the function of the mobile phone. For details, refer to the Owner's Manual of the mobile phone. • If a called person that you say is not found, "NO CALL" is displayed for 2 seconds. • If the voice is not detected or recognized by microphone within 30 seconds, "NO CALL" will be displayed for 2 seconds, and then the unit returns to the normal mode automatically. Redialing a Number In Outgoing History Previously dialed telephone numbers are stored in dialed calls history. You can redial a number by searching from dialed calls history.  Setting item: DIALED Dialing a Number In Incoming History Telephone numbers from received calls are stored in the Received List. You can redial these numbers by searching here.  Setting item: RECEIVED Dialing a Number In Incoming Missed Call History Telephone numbers for received calls that are missed, are stored in the Missed List. You can redial these numbers by searching here.  Setting item: MISSED Dialing a Number In The Phone Book Up to 1,000 names (at most 5 telephone numbers for each name) are downloadable from a mobile phone. Dial a call by selecting a person from the phone book list.  Setting item: PHONE BOOK Notes • The order of the list display depends on the setting of "PB ORDER" (refer to "Changing the Phone book List Order" on page 23). • If the call history or phone book of the mobile phone is added or deleted while it is connected to the unit, the list displayed on the unit may not be brought up to date. If it is not updated, you cannot correctly place a call. • You can display the information of a number stored in phone book by pressing VIEW k. Each press changes the display as Name  Telephone NO.  Telephone label*  Name If the information can not be obtained, "NO NAME","NO NUMBER" or "NO LABEL" will be displayed. * The telephone label of a number depends on the number information stored in Phone book of the mobile phone, which includes 5 types-GENERAL, MOBILE, HOME, OFFICE and OTHER. 25-EN