Alpine CDE-141 Quick Reference Guide - Page 37

Radio - reset button

Page 37 highlights

6 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. 7 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • To synchronize the clock to another clock/watch or radio time announcement, press and hold ENTER for at least 2 seconds after setting the "hour". Minutes will reset to "00". If the display shows over "30" minutes when you do this, the time will advance one hour. • Pressing r will return to the previous mode. • Pressing and holding r for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote-control sensor. Remote control sensor Radio SOURCE/ Rotary encoder TUNE/A.ME /ENTER   BAND Preset buttons (1 through 6) Listening to Radio 1 Press SOURCE to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed. F1 (FM1)  F2 (FM2)  AM  F1 (FM1) 3 Press TUNEA.ME to select the tuning mode. r (Distance mode)  t (Local mode)  off (Manual mode)  r Note • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press  or  to tune in the desired station. Holding down  or  will change the frequency continuously. Presetting Stations Manually 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. Notes • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. 9-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

9
-EN
6
Turn the
Rotary encoder
to adjust the minutes while the
time indication is blinking.
7
Press and hold
AUDIO
SETUP
for at least 2 seconds to
return to normal mode.
Notes
To synchronize the clock to another clock/watch or radio time
announcement, press and hold

ENTER
for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Pressing
r
will return to the previous mode.
Pressing and holding
r
for at least 2 seconds will return to normal
mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Listening to Radio
1
Press
SOURCE

to select TUNER mode.
2
Press
BAND
repeatedly until the desired radio band is
displayed.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Press
TUNE
A.ME
to select the tuning mode.
r
(Distance mode)
t
(Local mode)
off (Manual mode)
r
Note
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
Presetting Stations Manually
1
Select the radio band and tune in a desired radio station
you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6)
into which you wish to store
the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
Notes
A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote-control sensor.
Remote control sensor
Radio
BAND
/ENTER
SOURCE/
TUNE/A.ME
Rotary encoder
Preset buttons
(1 through 6)