Alpine CDE-163BT Owners Manual - Page 29

How to connect to a Bluetooth compatible device (Pairing) For details on the control from a Bluetooth compatible device, refer to the Owner's Manual of the Bluetooth compatible device. 1 Using your Bluetooth compatible device, select the "ALPINE", etc. for pairing. For Bluetooth compatible device with SSP (Secure Simple Pairing) 2-1 Turn the Rotary encoder to select "PAIR YES", and then press ENTER. If "PAIR NO" is selected, the connection will be canceled. For Bluetooth compatible device without SSP (Secure Simple Pairing) 2-2 Input the PIN code ("0000") in a Bluetooth compatible device. Note • The PIN code is fixed as "0000". 3 If the pairing was successful, "CONNECTED" is displayed for a few seconds. The head unit then returns to its previous state. Auto pairing with an iPod/iPhone When an iPod/iPhone is connected to the USB port, the unit will automatically pair with it. 1 Make sure USB PAIR is set to ON. Refer to "Setting the Auto Pairing with iPod/iPhone" on page 30. 2 Connect an iPod/iPhone to this unit's USB port. 3 Turn the Rotary encoder to select "PAIR YES", and then press ENTER.* If "PAIR NO" is selected, the connection will be canceled. * Depending on the iOS version, you may need to turn on the Bluetooth function manually on the iPod/iPhone side, then perform this step. 4 If pairing is successful, "CONNECTED" is displayed for a few seconds. The head unit then returns to its previous state. Notes • If the device has been paired with this unit previously, it will not USB Pair automatically. • If the connection is unsuccessful, "FAILED" is displayed. • After a successful pairing, the device and this unit should connect automatically whenever the vehicle's ignition is turned ON. If the auto reconnect fails, try to connect manually. • Set "VISIBLE M" to ON, so this unit is visible to other Bluetooth compatible devices. Refer to "Setting the Visible Mode" on page 30. Bluetooth SETUP The following steps 1 to 5 are common to the various Bluetooth functions. For details, refer to each individual function. Note • Set BT IN to ON, and then perform Bluetooth SETUP operation. Refer to "Setting the Bluetooth Connection (BT IN)" on page 29. 1 Press and hold YSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select "BLUETOOTH", and then press ENTER. The Bluetooth setup mode is activated. 3 Turn the Rotary encoder to select the desired items, and then press ENTER. BLUETOOTH: BT IN*1  USB PAIR  PAIRED DEV  VISIBLE M  CALL SOUND  CALLER ID  PB UPDATE*1  PB ORDER  SPEAKER SL*2  FW VERSION  FW UPDATE*1 *1 The items are not displayed during a phone call. *2 Not displayed when 2WAY/3WAY system mode is set to 3WAY. 4 Turn the Rotary encoder to change the settings. 5 Press and hold YSETUP for at least 2 seconds. The SETUP mode is canceled. Notes • Press t to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. Setting the Bluetooth Connection (BT IN) With Bluetooth technology, you can place a hands-free call by a Bluetooth-equipped Smartphone. Audio information of a Bluetooth compatible Smartphone, a portable audio player, etc., is controllable/playable wirelessly from this unit.  Setting item: BT IN Setting contents: OFF / ON (Initial setting) OFF: Hands-Free Phone function and Bluetooth Audio function are disabled. ON: Select when you want to pair your Bluetooth compatible phone with this unit or use Bluetooth Audio function. Note • When BT IN is set to OFF, the indicators related to Hands-free phone ( battery charge and signal strength) will not be displayed. 29-EN