Alpine INE-W970HD Installation Manual - Page 6

Mounting the Microphone Installation example using the Original For safe use, make sure of the following: Mounting Bracket • Location is stable and firm. 11 • Driver's view and operations are not obstructed. • Microphone is located where the driver's voice can be easily picked up (for example, on the sun visor). Mount the original mounting brackets to the unit using the supplied screws. Mount the original mounting bracket to the unit using the supplied screws. When you speak into the microphone, you should not have to change your driving posture. This may cause a distraction, taking your attention away from safely driving your vehicle. Carefully consider direction and distance while mounting the microphone. Ground Lead* Screws (M5 × 8) (Included) Confirm that the driver's voice can be easily picked up at the selected location. Chassis Microphone Cable clamp (Sold separately) Install the Mounting Sleeve Slide the unit into the mounting sleeve and secure it. Mounting Sleeve This unit Face plate*2 Original Mounting Bracket 2 Connect all other leads of the unit according to details described in the "Connections" (page 5). 3 Mounting the unit in a car. • Fix the cables carefully. Do not damage them by tucking them into movable parts, such as a seat rail, or by locating them against sharp or pointed edges. Note on using HDMI Connection Cables When using HDMI connection cables, secure the cables to the HDMI Terminals with the HDMI Fixation Bracket(KCU-610HD). *The HDMI bracket is not included. 1 Slide the HDMI Fixation Bracket into the grooves (A). 2 Secure it with the screw (B). HDMI Terminal Pressure Plates*1 Key Release *1 If the installed mounting sleeve is loose in the dashboard, the perssure plates may be bent slightly to remedy the problem. *2 The supplied face plate may be mounted. 4 -EN (A) (B) HDMI Fixation Bracket Sold Separtely (KCU-610HD) ALPINE_Install_Manual_AM_ENG_191019.indd 4 2019-10-19 오후 7:22:30