Alpine TME-M770S Owners Manual - Page 21
Foot brake lead Yellow/Black
UPC - 793276200495
View all Alpine TME-M770S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1 Foot brake lead (Yellow/Black) Connect this lead to the foot brake lead powered when the foot brake is pressed. 2 Hand brake lead (Yellow/Blue) Connect this lead to the hand brake lead powered when the hand brake is pulled. 3 Monitor control lead (White/Pink) Connect when upgrading with touch panel compatible products such as the IVA-D300. 45Remote control output lead (White/Brown) To remote control input lead of ALPINE products used in the system. 6 Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R). 7 ACC power lead (Red) To ACC power lead powered when engine key position is ACC. 8 Fuse (7.5A) 9 Ground lead (Black) Connect the lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. p Foot brake lamp q Brake connector (Included) w Foot brake lead e Foot brake switch r Hand (parking) brake lamp t Hand (parking) brake lead y Hand (parking) brake switch u Headphone i Main monitor o Connection cable ; RGB cable a To RGB output terminal s Made by Alpine navigation d Audio input connectors (AUX 1) Use these connectors to input the audio signals from a DVD player, video deck etc. f Video input connector (AUX 1) Use this connector to input the video signals from a DVD player, video deck etc. g Audio input connectors (AUX 2) Use these connectors to input the audio signals from a DVD player, video deck etc. h Video input connectors (AUX 2) Use this connector to input the video signals from a DVD player, video deck etc. j Audio output connectors Use these connectors to output audio signals to a rear monitor, etc. k Video output connector Use this connector to output video signals to a rear monitor, etc. • When connecting to an IVA-D300 or VPE-S431, use the "AUX IN 1" connector. When connecting a rear view camera, use the "AUX IN 2". To prevent external noise from entering the audio system. • Locate the unit and route the leads at least 10cm away from the car harness. • Keep the battery power leads as far away from other leads as possible. • Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information. • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information. FR ES DE IT SE 19-EN