Amana AER6303MFB Owners Manual - Page 6
Tools and Parts
View all Amana AER6303MFB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SURFACE UNDER COOKTOP (on some models) The coil cooktop will lift up to provide easy access for cleaning beneath. Lift the cooktop by both front corners until the support locks into place. Cleaning Method: � Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad. � Affresh® Kitchen and Appliance Cleaner Part Number W10355010 (not included): See the Quick Start Guide for contact information. To avoid damage to the range, do not remove the cooktop. OVEN RACKS Cleaning Method: � Steel-wool pad � For racks that have discolored and are harder to slide, a light coating of vegetable oil applied to the rack guides will help them slide � Dishwasher (steam rack water reservoir only, not racks): Although the water reservoir is durable, it may lose its shine and/or discolor when washed in a dishwasher STORAGE DRAWER OR WARMING DRAWER (on some models) Check that storage drawer or warming drawer is cool and empty before cleaning. Cleaning Method: � Mild detergent OVEN CAVITY Depending on your model, use AquaLift® Technology or SelfClean cycle regularly to clean oven spills. Do not use oven cleaners Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain. Staining, etching, pitting, or faint white spots can result. Cleaning Method: � Clean cycle: See "Clean Cycle" first. INSTALLATION INSTRUCTIONS REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed � Tape measure � Flat-blade screwdriver � Phillips screwdriver � Level � Hammer � Hand or electric drill � Wrench or pliers � Marker or pencil � Flashlight � Torque Wrench � Masking tape � 1/4" (6.4 mm) drive ratchet � 1/4" (6.4 mm) nut driver � 3/8" (9.5 mm) and 5/16" (8 mm) nut driver � 1/8" (3.2 mm) drill bit (for wood floors) � Tin snips or large wire cutters (for cutting ground strap if necessary) Parts supplied Check that all parts are included. � 3 - 10-32 hex nuts (attached to terminal block) � 3 - Terminal lugs A. Anti-tip bracket B. #12 x 15⁄8" (41 mm) screws (2) � Anti-tip bracket must be securely mounted to floor or wall. Thickness of flooring may require longer screws to anchor bracket to floor. Parts needed If using a power supply cord kit: � A UL listed power supply cord kit marked for use with ranges. The cord should be rated at 250 V minimum, 40 A or 50 A that is marked for use with nominal 13⁄8" (3.5 cm) diameter connection opening and must end in ring terminals or openend spade terminals with upturned ends. � A UL listed strain relief. Check local codes. Check existing electrical supply. See the appropriate "Electrical Requirements" section. It is recommended that all electrical connections be made by a licensed, qualified electrical installer. NOTE: Be sure to purchase only Whirlpool factory-certified parts and accessories for your appliance. Your installation may require additional parts. To order, refer to the contact information referenced in your Quick Start Guide. 6