Amana AGR5330BAW Installation Guide - Page 13
To Convert Gas Pressure Regulator, To Convert Surface Burners
View all Amana AGR5330BAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To Convert Gas Pressure Regulator 1. Open broiler door and remove broiler rack. The gas pressure regulator is located in the back right-hand corner of the broiler compartment. A To Convert Surface Burners 1. Remove burner grate, burner caps, and burners. A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. NOTE: Do not remove the spring beneath the cap. 2. Remove the cap from the gas pressure regulator using a flat-blade screwdriver. NOTE: Be sure sealing washer remains in the same position. A A. Cap 3. To convert to LP gas, unscrew the plastic adjustment screw by hand, turn it over, and screw it in again. Inlet pressure to Natural gas Inlet pressure to LP gas A B C 180º A. Cap B. Sealing washer C. Adjustment screw 4. Reinstall the cap. A B A. Burner cap B. Burner 2. Locate LP gas orifice spuds for top burners in the bag containing literature included with the range. Two LP gas spuds are stamped "88", one is stamped with "70," and one is stamped "96." 3. Remove Natural gas orifice spuds using a 7 mm combination wrench. 4. Install LP gas orifice spuds using a 7 mm combination wrench. A B A. Spud B. Holder 13