Amana NFW5700B Use and Care - Page 4

Control Panel And Features

Page 4 highlights

CONTROL PANEL AND FEATURES NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch 4 its name. 1 2 3 5 6 1 POWER Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time. 2 WASH CYCLE KNOB Use your Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. An LED will light up for the cycle selected. NOTE: The Clean Washer LED will flash when the washer has run 30 wash cycles as a reminder to run the Clean Washer cycle. See "Cycle Guide" for detailed descriptions of cycles. 3 HOLD TO START Touch and hold until the light above HOLD TO START comes on to start a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch HOLD TO START when the "Add a Garment" LED is on. 4 DELAY WASH Use + and - to delay the start of the wash cycle by up to 8 hours. To turn off Delay Wash, use + and - to set the delay time to "0," or touch POWER. 5 LED DISPLAY AND SETTINGS When you select a cycle, its default settings will light up and the Estimated Time Remaining will be displayed (for times longer than 99 minutes, hours will be displayed, followed by minutes). Factors such as load size, wash temperature, and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well. Touch the desired option along the bottom of the display to adjust settings. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles. Cycle Status Lights For details, see "Cycle Status Lights". Wash Temp The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, follow the garment label instructions. All wash temperatures feature a cold rinse. Spin This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed. • Faster spin speeds mean shorter dry times, but may increase wrinkling in your load. • Slower spin speeds reduce wrinkling, but will leave 4 your load more damp. 6 OPTIONS Touch to activate additional wash options or additional features on the washer. Control Lock Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. Touch and hold 3 seconds again to unlock. You can still touch HOLD TO START to pause the cycle, or touch POWER to turn the washer off. 7 C B A HE detergent B Liquid fabric softener A C Chlorine bleach 7 DISPENSER DRAWER The dispenser drawer gives you the convenience of automatically adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using the dispenser drawer. A High Efficiency "HE" detergent compartment This compartment holds liquid or powdered HE detergent for your main wash cycle. B Liquid fabric softener compartment Automatically dilutes and dispenses liquid fabric softener at the optimum time in the cycle. n Use only liquid fabric softener in this dispenser. C Liquid chlorine bleach compartment Automatically dilutes and dispenses liquid chlorine bleach at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

4
CONTROL PANEL AND FEATURES
NOTE:
The control panel features a sensitive surface that
responds to a light touch of your finger. To ensure your selections
are registered, touch the control panel with your finger tip, not
your fingernail. When selecting a setting or option, simply touch
its name.
OPTIONS
Touch to activate additional wash
options or additional features on the washer.
Control Lock
Touch and hold for 3 seconds to lock the controls
to avoid unwanted changes or operation. Touch and hold
3 seconds again to unlock. You can still touch HOLD TO
START to pause the cycle, or touch POWER to turn the
washer off.
6
7
High Efficiency “HE” detergent compartment
This compartment holds liquid or powdered HE detergent
for your main wash cycle.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric softener
at the optimum time in the cycle.
n
Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine bleach
at the optimum time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
B
C
A
DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the proper time.
See “Using the Dispenser Drawer” for information on using
the dispenser drawer.
B
A
HE detergent
Liquid fabric
softener
Chlorine bleach
7
C
A
C
B
3
4
2
1
5
6
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE:
The Clean Washer LED will flash when the washer
has run 30 wash cycles as a reminder to run the Clean
Washer cycle.
See “Cycle Guide” for detailed descriptions of cycles.
HOLD TO START
Touch and hold until the light above HOLD TO START comes
on to start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch HOLD
TO START when the “Add a Garment” LED is on.
DELAY WASH
Use
+
and
to delay the start of the wash cycle by up to
8 hours. To turn off Delay Wash, use
+
and
to set the delay
time to “0,” or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed (for times
longer than 99 minutes, hours will be displayed, followed
by minutes). Factors such as load size, wash temperature,
and water pressure may affect the time shown in the display
during the cycle. Tightly packing garments, unbalanced loads,
or excessive suds may cause the washer to adjust the cycle
time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See “Cycle Guide” for available settings on
each cycle. Not all settings are available with all cycles.
Cycle Status Lights
For details, see “Cycle Status Lights”.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, follow the garment label instructions. All wash
temperatures feature a cold rinse.
Spin
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
1
2
3
4
5