American Standard 3264.016.222 Installation Instructions - Page 3

10 TOP ARM REFILL NIPPLE TUBE CRITICAL LEVEL MARK ("C.L.") MUST BE 1" ABOVE OVERFLOW PIPE FILL VALVE WATER LEVEL ADJUSTMENT CLIP VALVE BODY FLOAT CUP TANK LEVER "S" CLIP LINK FLUSH VALVE ADJUSTABLE HEIGHT FLAPPER SHANK WASHER Fig. 10A ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup. See Step 11 for water level adjustment method b. If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip (see Fig. 10A) and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught. LOCK NUT CONE WASHER COUPLING NUT (HAND TIGHT ONLY) THREADED SHANK PARTS FOR WATER CONNECTION (SEE STEP 9) Diagram 1 11 Turn on water supply. Adjust water to desired level by squeezing water level adjustment clip and moving FLOAT CUP up or down along stainless steel link. 12 CARE AND CLEANING When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish. ! WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite). REPAIR PARTS LIST Repair parts are determined by toilet tank number which can be found marked inside tank. NOTE: "XXX" represents color or trim finish options. Specify when ordering. PART NO. 738608-XXX0A 034783-XXX0A 730505-0070A 738565-400.0070A 738600-0070A 738605-0070A 4396.016 735099-400A 5725.064.XXX DESCRIPTION TRIP LEVER BOLT CAP KIT (INCL TWO COVERS & WASHERS) COUPLING KIT, BOWL-TO-TANK FLUIDMASTER 400A VALVE FLAPPER ASSEMBLY FLUSH VALVE ASSEMBLY TANK TANK COVER SEAT - ELONGATED - 3 - 730517-100