Asko D5233 User manual Use & Care Guide Asko D5233 EN - Page 22

Setting a signal If you want the machine to signal when the wash is complete, you can program it to do this. The machine is set without a signal by default. 1. Switch off the dishwasher at the main switch. 2. Hold in the Delayed start button at the same time as you press the main switch. The button flashes. Release the button. PROG 3. START STOP 4. Press the Program button - when the Auto wash symbol lights, the signal is activated. Press the Start/Stop button and the setting will be stored until next time you want to make a change. or Reset 1. 2. PROG 3. START 4. S TOP Switch off the dishwasher with the main switch. Hold in the Delayed start button at the same time as you press the main switch. The button flashes. Release the button. Press the Program button - when the Auto wash symbol goes out, the signal is deactivated. Press the Start/Stop button and the setting will be stored until next time you want to make a change. Customer Care Center 22 1-800-898-1879 www.askousa.com